|Home||» Products||» Heat Transfer Lab Equipments||» Single Effect Evaporator|
Owing to our rich knowledge as well as professional workforce, we have achieved a noted position as a reliable manufacturer and supplier of Single Effect Evaporator. It is used to concentrate a solution and to evaluate overall heat transfer co-efficient. We use optimum quality materials and components, sourced from trusted vendors to manufacture this apparatus. Single Effect Evaporator is well equipped with stainless steel tubes surrounded by a stainless steel jacket and fitted with accumulator.
Evaporation deals with the concentration of a non-volatile solute from a solution by the removal of required amount of volatile solvent. Usually the solvent is water. By vaporizing a part of the solvent, useful product i.e. the concentrated solution or thick liquor is produced and the vapour is discarded. Long tube evaporators are usually used for the concentration of foamy liquids. The set-up consists of stainless steel tubes surrounded by a stainless steel jacket and fitted with accumulator. Dilute solution is feed to tubes. Steam from a steam generator is supplied to shell to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapours of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute collected in the accumulator is recycled through the evaporator.
To concentrate a solution and to evaluate the following at steady state:
Material and Heat Balance.
Economy and the capacity of the evaporator.
Overall heat transfer co-efficient.